Hdpe Pe100 Pipes
HDPE PE100 pipes are high-density polyethylene pipes used to carry pressurised water in drinking water, clean water and agricultural irrigation lines. Düzgünler Plastik makes them to the TS EN 12201-2 standard, in coils and straight lengths.
Short answer: "PE100" means the polyethylene has a minimum required strength (MRS) of 10 MPa. The previous generation, PE80, has 8 MPa.
A stronger material needs a thinner wall for the same pressure. That gives a wider bore and more flow at the same outside diameter.
PE100 plus: Thinner wall and wider bore at the same pressure class
PE100 plus: Suits high-pressure and large-diameter lines
PE80 difference: Needs a thicker wall for the same pressure
Short answer: sizes from Ø20 to Ø110 mm come in coils; larger sizes come as 6–12 m straight pipes.
|
Feature |
Coil |
Straight Length |
|---|---|---|
|
Diameter |
Ø20–Ø110 mm |
Above Ø110 mm |
|
Length |
Coil |
6–12 m |
|
Benefit |
Fewer joints, easy transport |
Large mains |
|
Typical use |
Service lines, irrigation |
Networks, transmission lines |
Short answer: the SDR value sets the pressure class. In PE100, an SDR11 pipe is PN16 (16 bar) and an SDR17 pipe is PN10 (10 bar).
A lower SDR means a thicker wall and a higher pressure rating.
Choose the class by the highest operating pressure on the line.
Drinking and clean water networks
Agricultural irrigation mains (HDPE irrigation pipe)
Transmission lines between wells and tanks
Building and plant water connections
Public tenders often define HDPE pipe requirements in documents such as the Turkish Ministry of Agriculture and Forestry HDPE pipe technical specification-borular-genel-teknik-şartnamesi_r00_20150817.pdf).
Butt fusion: Pipe ends are heated and pressed together on large straight pipes.
Electrofusion: A heated coupler makes a leak-tight joint.
Compression fittings: HDPE pipe fittings for quick, weld-free joints on small coil sizes.
Düzgünler Plastik was founded in 1975 by Ekrem Düzgün and has made plastic pipes since 1996. It was the first company in Türkiye to produce plastic column pipes for submersible pumps. The company states that its HDPE PE100 pipes meet TS EN 12201-2 and are made under the ISO 9001:2015 quality management system; pipes come in royal blue or black with a blue stripe.
A high-density polyethylene pressure pipe with a minimum required strength of 10 MPa.
Ø20 mm to Ø110 mm.
SDR11 (PN16).
TS EN 12201-2.
Diameter, SDR class, coil or straight format and order quantity. Ask for a quote.
HDPE is the material; PE100 is its strength class.
6 to 12 metres.
Royal blue, or black with a blue stripe (blue stripe HDPE pipe), depending on the application.
|
Author: Düzgünler Plastik Technical Team — polyethylene and U-PVC pipe production and quality control specialists. Sources: Turkish Ministry of Agriculture and Forestry HDPE pipe specification-borular-genel-teknik-şartnamesi_r00_20150817.pdf) · ISO 9001 For more information about our products and production processes, please contact us. |
For more information, please contact us.