Düzgünler Plastik corrugated pipe types and dimensions cover 7 nominal sizes (100, 150, 200, 300, 400, 500 and 600) and 2 ring stiffness classes (SN4 and SN8). Size 100 comes only in SN8; all other sizes come in SN4 and SN8. The product sits in the Corrugated Pipes category.
Short answer: the nominal size is close to the inner diameter. The values below come from the manufacturer's product table.
|
Nominal size |
Class |
Inner diameter min. (mm) |
Outer diameter max. (mm) |
|---|---|---|---|
|
100 |
SN8 |
97 |
111 |
|
150 |
SN4 – SN8 |
147 |
169 |
|
200 |
SN4 – SN8 |
197 |
229 |
|
300 |
SN4 – SN8 |
296 |
336 |
|
400 |
SN4 – SN8 |
396 |
451 |
|
500 |
SN4 – SN8 |
496 |
562 |
|
600 |
SN4 – SN8 |
597 |
692 |
Corrugated pipe is double wall. The ribbed outer layer sits on top of the inner wall, so the outer diameter is clearly larger. Trench width and fittings follow the outer diameter; flow calculations use the inner diameter.
SN4 pipe (4 kN/m²): Light-load areas such as gardens, fields and around buildings
SN8 pipe (8 kN/m²): Lines under roads, car parks and heavy traffic
Note: Size 100 is available in SN8 only.
SN is ring stiffness measured with the ISO 9969 method.
100–200: Plot connections, building drainage, cable protection
300–400: Street and estate wastewater and stormwater lines
500–600: Main collector and stormwater trunk lines
This is general guidance; the exact size comes from the project flow calculation.
Nominal size (e.g. 100, 200, 400)
Class (SN4 or SN8)
Total length
Fittings list: sleeves, gaskets, elbows, tees, reductions, blind ends
Prices depend on size, class and quantity; we prepare the quote from these details.
Düzgünler Plastik was founded in 1975 by Ekrem Düzgün, has made plastic pipes since 1996 and was the first company in Türkiye to produce plastic column pipes for submersible pumps. It supplies double wall corrugated pipe in 7 sizes from 100 to 600, with all fittings, from its plant in Konya's 3rd Organized Industrial Zone.
Nominal sizes 100, 150, 200, 300, 400, 500 and 600.
Up to 111 mm, with a minimum inner diameter of 97 mm.
No. Size 100 is made in SN8 only.
Size 600: minimum inner diameter 597 mm, maximum outer diameter 692 mm.
Size, class, length and fittings. Ask for a quote.
At least 197 mm; the outer diameter is up to 229 mm.
The largest size in the manufacturer's table is 600.
SN8 has higher ring stiffness and carries more outside load at the same size.
|
Author: Düzgünler Plastik Technical Team — HDPE and U-PVC pipe production and quality control specialists. Sources: Düzgünler Plastik corrugated pipe size table · ISO 9969 — Thermoplastics pipes, ring stiffness Contact us for a quote and technical information. |
For more information about our products and production processes, please contact us.
|
Nominal Sizes |
CLASS |
Inner Diameter min. (mm) |
Outer Diameter max. (mm) |
| 100 | SN8 | 97 mm | 111 mm |
| 150 | SN4 - SN8 | 147 mm | 169 mm |
| 200 | SN4 - SN8 | 197 mm | 229 mm |
| 300 | SN4 - SN8 | 296 mm | 336 mm |
| 400 | SN4 - SN8 | 396 mm | 451 mm |
| 500 | SN4 - SN8 | 496 mm | 562 mm |
| 600 | SN4 - SN8 | 597 mm | 692 mm |