10 Atu latched sprinkler pipes are blue-striped polyethylene irrigation pipes made for 10 bar operating pressure, joined and taken apart with a latch lock. Düzgünler Plastik makes them in 8 sizes from Ø50 to Ø160, in 5 and 6 meter lengths.
They are the highest pressure class and the thickest-walled option in the range, for lines above 8 bar but not over 10 bar.
Short answer: 8 sizes, walls 2.90–9.40 mm, from the official product table, with 5 and 8 Atu for comparison.
|
Diameter |
5 Atu (mm) |
8 Atu (mm) |
10 Atu (mm) |
|---|---|---|---|
|
Ø50 |
1.50 |
2.40 |
2.90 |
|
Ø63 |
1.90 |
3.00 |
3.70 |
|
Ø75 |
2.25 |
3.60 |
4.40 |
|
Ø90 |
2.70 |
4.30 |
5.30 |
|
Ø110 |
3.55 |
5.30 |
6.50 |
|
Ø125 |
4.10 |
6.00 |
7.40 |
|
Ø140 |
4.65 |
6.70 |
8.20 |
|
Ø160 |
5.35 |
7.60 |
9.40 |
Short answer: at the same diameter, the 10 Atu wall is about 1.8 to 2 times the 5 Atu wall. Examples from the table:
Ø50: 2.90 mm instead of 1.50 mm
Ø90: 5.30 mm instead of 2.70 mm
Ø160: 9.40 mm instead of 5.35 mm
Short answer: if the highest line pressure is above 8 bar but not over 10 bar, choose 10 Atu; below 8 bar, 8 Atu is enough.
The thickest wall in the range: at Ø110, 6.50 mm vs 5.30 mm for 8 Atu.
The only latched class for lines above 8 bar.
Same sizes and lengths as the other classes.
The heaviest pipe in the range at the same diameter.
Extra material on lines below 8 bar.
No higher latched class exists for lines above 10 bar.
Systems where the pump puts more than 8 bar on the line
Long lines running down steep slopes
Fields with a large height difference between the pump and the lowest point
Düzgünler Plastik was founded in 1975 by Ekrem Düzgün as an agricultural machinery maker and has made plastic pipes since 1996. The company states that its 10 Atu latched sprinkler pipes, an HDPE irrigation pipe, are made to TS EN 12201-3 under the ISO 9001:2015 quality management system. The latch makes it a quick-coupling irrigation pipe that sets up without tools.
They are made for 10 bar operating pressure.
The 10 Atu class. At Ø160, the wall is 9.40 mm.
3.70 mm.
There is no latched class above 10 Atu. Review the irrigation design and ask the company for advice.
Diameter, pressure class, length and quantity. Ask for a quote.
TS EN 12201-3.
5 and 6 meters.
Four: 5, 6, 8, and 10 Atu.
|
Author: Düzgünler Plastik Technical Team — polyethylene irrigation pipe production and quality control specialists. About the company Sources: Latched Sprinkler Pipe product page · ISO 9001 For more information about our products and production processes, please contact us. |
For more information please contact us.
| PIPE DIAMETER | PN 5 THICKNESS | PN 6 THICKNESS | PN 8 THICKNESS | PN 10 THICKNESS |
| mm | mm | mm | mm | mm |
| Ø50 | 1,50 | 1,80 | 2,40 | 2,90 |
| Ø63 | 1,90 | 2,10 | 3,00 | 3,70 |
| Ø75 | 2,25 | 2,50 | 3,60 | 4,40 |
| Ø90 | 2,70 | 3,00 | 4,30 | 5,30 |
| Ø110 | 3,55 | 4,10 | 5,30 | 6,50 |
| Ø125 | 4,10 | 4,70 | 6,00 | 7,40 |
| Ø140 | 4,65 | 5,40 | 6,70 | 8,20 |
| Ø160 | 5,35 | 6,15 | 7,60 | 9,40 |