8 Atu latched sprinkler pipes are blue-striped polyethylene irrigation pipes made for 8 bar operating pressure, joined and taken apart with a latch lock. Düzgünler Plastik makes them in 8 sizes from Ø50 to Ø160, in 5 and 6 meter lengths.
They are the second-highest of four pressure classes, for lines above 6 bar but not over 8 bar.
Short answer: 8 sizes, walls 2.40–7.60 mm, from the official product table, with 6 and 10 Atu for comparison.
|
Diameter |
6 Atu (mm) |
8 Atu (mm) |
10 Atu (mm) |
|---|---|---|---|
|
Ø50 |
1.80 |
2.40 |
2.90 |
|
Ø63 |
2.10 |
3.00 |
3.70 |
|
Ø75 |
2.50 |
3.60 |
4.40 |
|
Ø90 |
3.00 |
4.30 |
5.30 |
|
Ø110 |
4.10 |
5.30 |
6.50 |
|
Ø125 |
4.70 |
6.00 |
7.40 |
|
Ø140 |
5.40 |
6.70 |
8.20 |
|
Ø160 |
6.15 |
7.60 |
9.40 |
Short answer: when the highest pressure on the line goes above 6 bar. The main causes are:
Strong pump: The pump puts more than 6 bar on the line.
Sloping field: Pressure rises as the line goes downhill.
Height difference: The lowest point of the line sits well below the pump.
Short answer: up to 8 bar, 8 Atu is enough; above that, choose 10 Atu. Only the wall thickness differs.
Much thicker than 6 Atu: at Ø110, 5.30 mm instead of 4.10 mm.
Lighter than 10 Atu at the same diameter.
Needs less material than 10 Atu on lines up to 8 bar.
Not for lines above 8 bar.
Heavier than 6 Atu; extra material on low-pressure lines.
Thinner than 10 Atu: at Ø160, 7.60 mm vs 9.40 mm.
The latch joins and releases pipes without tools, so this quick coupling irrigation pipe moves with the sprinkler irrigation system from plot to plot during the season.
Düzgünler Plastik was founded in 1975 by Ekrem Düzgün as an agricultural machinery maker and has made plastic pipes since 1996. The company states that its 8 Atu latched sprinkler pipes, an HDPE irrigation pipe, are made to TS EN 12201-3 under the ISO 9001:2015 quality management system.
They are made for 8 bar operating pressure.
Sizes and lengths are the same; 8 Atu has a thicker wall. At Ø75, 6 Atu is 2.50 mm and 8 Atu is 3.60 mm.
5.30 mm.
Choose by the highest pressure on the line. If it is between 6 and 8 bar, 8 Atu is the right class.
Diameter, pressure class, length and quantity. Ask for a quote.
High-density polyethylene (HDPE).
2.40 mm, at Ø50.
5 and 6 meters.
|
Author: Düzgünler Plastik Technical Team — polyethylene irrigation pipe production and quality control specialists. About the company Sources: Latched Sprinkler Pipes product page · ISO 9001 For more information about our products and production processes, please contact us. |
For more information please contact us.
| PIPE DIAMETER | PN 5 THICKNESS | PN 6 THICKNESS | PN 8 THICKNESS | PN 10 THICKNESS |
| mm | mm | mm | mm | mm |
| Ø50 | 1,50 | 1,80 | 2,40 | 2,90 |
| Ø63 | 1,90 | 2,10 | 3,00 | 3,70 |
| Ø75 | 2,25 | 2,50 | 3,60 | 4,40 |
| Ø90 | 2,70 | 3,00 | 4,30 | 5,30 |
| Ø110 | 3,55 | 4,10 | 5,30 | 6,50 |
| Ø125 | 4,10 | 4,70 | 6,00 | 7,40 |
| Ø140 | 4,65 | 5,40 | 6,70 | 8,20 |
| Ø160 | 5,35 | 6,15 | 7,60 | 9,40 |